D-Link DGS-3000-10TC Przełącznik zarządzalny L2 8 portów 10/100/1000 + 2xCombo 1000BaseT/SFP
Biuro obsługi klienta: +48 34 333 67 76
Zakupy hurtowe - Kupuj ten produkt w cenach hurtowych: Panel B2B
Cena:
Produkt archiwalny
- Koszt przesyłki: od 19,07
- Darmowa dostawa od kwoty 2000,00 zł
Opis produktu
The DGS-3000-10TC is part of the Layer 2 family of D-Link’s managed switch product line that provides wired Gigabit speed access for metro and campus networks. The DGS-3000-10TC is designed as a 1U rackmount case suitable for enterprise access or service provider telecom cabinets, maximising network performance without compromising on reliability and security. Green technology decreases energy costs by reducing power consumption, without compromising on performance.
Reliable Networking
All of the Ethernet ports of the DGS-3000-10TC support 6kV surge/lightning protection. This feature protects the switch from power surges due to lightning or improper electrical wiring when the Ethernet cables are exposed in open spaces, such as in old buildings. For Ethernet link fail-over, the DGS-3000-10TC supports 802.1D Spanning Tree Protocol (STP), 802.1w Rapid Spanning Tree Protocol (RSTP), and 802.1s Multiple Spanning Tree Protocol (MSTP), to allow automatic backup of bridge paths. Using these features, the transmission and reception of frames can be guaranteed even during a network failure. For mission critical environments, the switches also support ITU-I G.8032 Ethernet Ring Protection Switching (ERPS); traffic can be rerouted around the ring within 50 milliseconds, minimising disruption to service. D-Link Loopback Detection (LBD) is a protocol-less loop detection function that prevent loop events from causing congestion in uncontrolled network segments such as unmanaged switches or customer networks. The DGS-3000-10TC also support 802.1AX and 802.3ad Link Aggregation, which allows grouping of multiple ports in parallel to increase bandwidth and redundancy for high availability and load sharing in a multi-client environment.
Virtual Stacking reduces the number of IP addresses needed on a network by configuring up to 32 devices to appear as a single unit with one IP address. This simplifies network management for small workgroups and allows for switches to be added without special cabling.
Solid Security with High Availability
The DGS-3000-10TC offers various user/device authentication features including 802.1X, Web-based Access Control (WAC)1 and MAC-based Access Control (MAC). The clientless WAC1 and MAC functions provide convenience for IT managers implementing user/device authentication into a network. It permits administrators to control security without installing client software on each network device; this is especially important for devices on which the software cannot be installed. For a greater security level, the DGS-3000-10TC also supports Compound Authentication1, letting IT managers choose between multiple authentication methods for any single device. Selectable host-based authentication and authorisation provides the option to finely control access by each device in the network. For advanced applications, the switches also provide RADIUS and TACACS accounting information for integration of backend services such as a billing system or advanced user/device control. In mission critical networks, the DGS-3000-10TC supports strict address and interface binding function via IP-MAC-Port Binding and ARP Spoofing Prevention to protect the networks from Man-In-The-Middle or ARP Spoofing attacks.
To maintain a high availability network, the DGS-3000-10TC uses D-Link Safeguard Engine to manage the CPU and ensure that your network stays up even if it is overloaded by malicious traffic caused by worms and viruses. The switches also support DHCP Screening to filter out unauthorised DHCP offerings from rogue DHCP servers or routers. Other security features such as BPDU Attack Protection, DoS Attack Prevention, and L3 Control Packet Filtering help to block leaks caused by protocol or behavioural security intrusions.
Deliver Triple Play Services
The DGS-3000-10TC features full L2 multicast functions, including IGMP/MLD snooping, fast leave, and filtering. With L2 multicast support, the switches can handle the increasingly popular IPTV service. Host-based IGMP/MLD Snooping provide service to multiple IPTV subscribers per physical interface and ISM VLAN registers multicast streams in a multicast VLAN to save bandwidth on the network backbone. The ISM VLAN profiles allow users to bind or replace the channel profiles of subscription ports quickly and easily. The DGS-3000-10TC also supports IGMP authentication, which can prevent rogue IPTV subscriptions by authenticating Set Top Boxes as well as channel switching to secure Internet Service Provider (ISP) revenues.
The DGS-3000-10TC also supports advanced Quality of Service (QoS) functions to help ISPs reliably deliver high-quality triple play services. Flexible packet classification can be based on various header fields or user-defined packet content to help administrators prioritise network traffic. Two-rate and single-rate Three Colour Marker (trTCM/srTCM) help classify traffic streams into conforming and nonconforming groups to guarantee the minimum bandwidth for prioritised packets. The Bandwidth Control feature allows ISPs to define the upstream/downstream throughput levels for each port with granularity down to 64 kbps.
Easy Maintenance and Troubleshooting
The DGS-3000-10TC features rich Operations, Administration, and Management (OAM) features to help ISPs reduce the burden of maintenance and troubleshooting. Cable diagnostics display the status of Ethernet cables and locate the position of cable errors remotely, helping providers cut onsite support costs. 802.1ag Connectivity Fault Management (CFM) provides administrators with a convenient tool to monitor and troubleshoot end-to-end service networks. This allows service providers to check connectivity, isolate network issues, and identify the affected customers. D-Link Unidirectional Link Detection (DULD) helps detect a broken one-way fibre connection, improving the stability of the fibre infrastructure in a Metropolitan Area Network.
IPv6 Ready
The DGS-3000-10TC is IPv6 ready and supports various IPv6 functions such as MLD Snooping, WAC1, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-3000-10TC also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-3000-10TC are certified to be IPv6 ready, which guarantees interoperability for IPv6 environments.
Technical Specifications
Interface
Ports
- 8-Port 10/100/1000BASE-T
- 2-Port Combo 10/100/1000BASE-T/SFP
Console Port
- J-45
Performance
Switching Capacity
- 20 Gbps
64 Byte Packet Forwarding Rate
- 14.88 Mpps
MAC Address Table
- 16K Entries
DRAM for CPU
- 128 MB
Packet Buffer Memory
- 1.5 MB
Flash Memory
- 32 MB
Jumbo Frame
- 12,288 Bytes
Physical
MTBF
- 711565.6 hours
Acoustic
- 33.8 dB
Heat Dissipation
- 56.26 Btu/hour
Power Input
- AC Input 100 to 240 V AC, 50 to 60 Hz Internal Universal Power Supply
Max Power Consumption
- 16.5 W
Dimensions (W x D x H)
- 228.5 x 195 x 44 mm
Weight
- 1.11 kg
Ventilation
- Smart Fan (Turns on at > 26 ˚C; Turns off at < 20 ˚C)
Power Surge Protection
- All Ethernet ports support IEC61000-4-5 10/700us 6 kV surge protection
Operation Temperature
- 0 to 50°C (32 to 122°F)
Storage Temperature
- -40 to 70°C (-40 to 158°F)
Operation Humidity
- 10% to 90% RH
Storage Humidity
- 5% to 90% RH
Emission (EMI)
- CE, FCC, IC, C-Tick, VCCI, BSMI
Safety
- CB, UL/cUL, BSMI
Certifications
- IPv6 Ready Logo Phase 2
Software Features
Virtual Stacking
- D-Link Single IP Management
- Up to 32 units per Virtual Stack
L2 Features
- 16K MAC Address Table
- Flow Control:
- 802.3x Flow Control
- HOL Blocking Prevention
- Jumbo Frames up to 12K bytes
- Spanning Tree Protocols:
- 802.1D STP
- 802.1w RSTP
- 802.1s MSTP
- BPDU Filtering
- Root Restriction
- Loopback Detection
- Link Aggregation:
- Compliant with 802.1AX and 802.3ad
- Max. 5 groups, 8 ports per group
- Port Mirroring:
- Supports 1 Mirroring group
- Supports One-to-One, Many-to-One, Flow-based (ACL) Mirroring
- Ethernet Ring Protection Switching (ERPS)
- L2 Protocol Tunneling (L2PT)
L2 Multicasting
- IGMP Snooping:
- IGMP v1/v2 Snooping, v3 awareness
- Supports 1024 groups
- Port/Host-based IGMP Snooping Fast Leave
- Report Suppression
- IGMP Authentication
- IGMP/MLD Proxy Reporting
- Limited IP Multicast (IGMP Filtering)
- MLD Snooping:
- MLD v1, MLD v2 awareness
- Supports 1024 groups
- Host-based MLD snooping Fast Leave
VLAN
- VLAN Group:
- Max. 4094 VLAN
- Port-based VLAN
- MAC-based VLAN
- GVRP:
- Max. 255 dynamic VLANs
- 802.1v Protocol VLAN
- 802.1Q Tagged VLAN
- Double VLAN (Q-in-Q):
- Port-based Q-in-Q
- Selective Q-in-Q
- ISM VLAN
- VLAN Translation
- Voice VLAN
- VLAN Trunking
L3 Features
- Support 1024 ARP Entries
- Gratuitous ARP
- IPv6 Neighbor Discovery (ND)
- Default Route
Quality of Service (QoS)
- 8 queues per port
- DSCP
- 802.1p
- Bandwidth Control:
- Port-based (Ingress/Egress, min. granularity 64 kbps)
- Flow-based (Ingress/Egress, min. granularity 64 kbps)
- Per egress queue bandwidth control (min. granularity 64 kbps)
- Queue Handling:
- Strict Priority Queue (SPQ)
- Weighted Round Robin (WRR)
- Deficit Round Robin (DRR)
- SPQ + WRR
- Supports the following actions for flows:
- Remark 802.1p Priority Tag
- Remark TOS/DSCP Tag
- Time-based QoS
- Three Color Marker
- trTCM
- srTCM
- CoS Based on:
- 802.1p Priority Queues
- VLAN ID
- MAC Address
- Ether Type
- IPv4/v6 Address
- IPv6 Traffic Class
- IPv6 Flow Label
- DSCP
- Protocol Type
- TCP/UDP Port
- User-Defined Packet Content
Access Control List(ACL)
- ACL based on:
- Switch Port
- 802.1p Priority
- VLAN ID
- MAC Address
- Ether Type
- IPv4/v6 Address
- IPv6 Traffic Class
- IPv6 Flow Label
- DSCP
- Protocol Type
- TCP/UDP Port Number
- User Defined Packet Content
- Up to 1024 ingress access rules
- Time-based ACL
- ACL Statistics
- CPU Interface Filtering
Security
- SSH v1/v2
- SSL v1/v2/v3
- Port Security
- Up to 64 MAC addresses per port
- Broadcast/Multicast/Unicast Storm Control
- IP-MAC-Port Binding (IMPB)
- ARP Inspection
- IP Inspection
- DHCP Snooping
- Traffic Segmentation
- D-Link Safeguard Engine
- L3 Control Packet Filtering
- NetBIOS/NetBEUI Filtering
- DHCP Server Screening
- DHCP Client Filtering
- ARP Spoofing Prevention
- BPDU Attack Protection
- DoS Attack Prevention
AAA
- 802.1X
- Port-based Access Control
- Host-based Access Control
- Dynamic VLAN Assignment
- MAC-based Access Control (MAC)
- Port-based Access Control
- Host-based Access Control
- Dynamic VLAN Assignment
- Web-based Access Control (WAC)1
- Port-based Access Control
- Host-based Access Control
- Dynamic VLAN Assignment
- Japan Web-based Access Control (JWAC)
- Host-based Access Control
- Dynamic VLAN Assignment
- Compound Authentication1
- Microsoft® NAP (IPv4/v6)
- Supports 802.1x NAP
- Supports DHCP NAP
- Guest VLAN
- RADIUS (IPv4/v6)
- TACACS
- TACACS+
- XTACACS+
- Trusted Host
- RADIUS Accounting
- TACACS+ Accounting
- Four-level User Account
OAM
- Cable Diagnostics
- 802.3ah Ethernet Link OAM
- 802.1ag Connectivity Fault Management (CFM)
- 802.3ah D-link Unidirectional Link Detection (DULD)
- Y.1731 OAM2
- sFlow
Green Features
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- Power-saving function
- Link Status
- Cable Length
- LED Shut-Off
- Port Shut-Off
- Port Standby
- System Hibernation
Management
- Web-based GUI (Supports IPv4/v6)
- Command Line Interface (CLI)
- Telnet Server/Client (Supports IPv4/v6)
- TFTP Client (Supports IPv4/v62)
- FTP Client (Supports IPv4/v6)
- ZModem
- Command Logging
- SNMP v1/v2c/v3
- SNMP Traps
- System Log
- SMTP
- RMON v1:
- Supports 1,2,3,9 groups
- RMON v2:
- Supports Probe Config group
- 802.1AB LLDP
- LLDP-MED
- BootP/DHCP Client
- DHCP Auto-Configuration
- DHCP Relay (Support IPv4)
- DHCP Relay Option 60, 61 and 82
- DHCP Client Option 12
- PPPoE Circuit-ID Tag Insertion
- Multiple Image
- Flash File System
- CPU Monitoring
- Memory Monitoring
- NTP/SNTP
- Debug Command
- Password Recovery
- Password Encryption
- Ping (Supports IPv4/v6)
- Traceroute
- Microsoft® NLB (Network Load Balancing) Support
MIB
- RFC1065, 1066, 1155, 1156, 2578 MIB Structure
- RFC1212 Concise MIB Definitions
- RFC1213 MIB II
- RFC1215 MIB Traps Convention
- RFC1493, 4188 Bridge MIB
- RFC1157, 2571-2576 SNMP MIB
- RFC1901-1908, 3418, 3636, 1442, 2578 SNMPv2 MIB
- RFC271,1757, 2819 RMON MIB
- RFC2021 RMONv2 MIB
- RFC1398, 1643, 1650, 2358, 2665, 3635 Ether-like MIB
- RFC2668 802.3 MAU MIB
- RFC2674, 4363 802.1p MIB
- RFC2233, 2863 Interface Group MIB
- RFC2618 RADIUS Authentication Client MIB
- RFC4022 MIB for TCP
- RFC4113 MIB for UDP
- RFC3298 MIB for Diffserv
- RFC2620 RADIUS Accounting Client MIB
- RFC 2925 Ping & Traceroute MIB
- Running configuration write and backup
- TFTP uploads and downloads
- Trap MIB
- RFC 2465 IPv6 MIB
- RFC 2466 ICMPv6 MIB
- RFC 2737 Entity MIB
- RFC 4293 IPv6 SNMP Mgmt Interface MIB
- Private MIB
- RFC 3289 DIFFSERV MIB
IETF® Standards
- RFC768 UDP
- RFC791 IP
- RFC792 ICMPv4
- RFC2463, 4443 ICMPv6
- RFC4884 Extended ICMP to Support Multi-Part Messages
- RFC793 TCP
- RFC826 ARP
- RFC1338, 1519 CIDR
- RFC2474, 3168, 3260 Definition of the DS Field in the IPv4 and IPv6 Header
- RFC1321, 2284, 2865, 2716, 1759, 3580, 3748 Extensible Authentication Protocol (EAP)
- RFC2571, RFC2572, RFC2573, RFC2574 SNMP
IPv6
- RFC2460 IPv6
- RFC2461, 4861 Neighbor Discovery
- RFC2462, 4862 IPv6 Stateless Address Auto-configuration
- RFC2464 IPv6 Neighbor over Ethernet and definition
- RFC3513, 4291 IPv6 Addressing Architecture
- RFC2893, 4213 IPv4/IPv6 dual stack function
- IPv6 Ready Logo Phase 2
Produkty z tej samej kategorii
Newsletter
Chcesz otrzymywać informacje o nowościach
Wpisz swój adres e-mail